Rigid joint XGQT1
Keywords：
Category：
Hotline：
Rigid joint XGQT1
Brief introduction
A quick assembly joint consisting of split type clamps, rubber sealing rings, and fasteners is used. At the joint, adjacent pipe ends are not allowed to have relative angular displacement and axial displacement of split type clamps.
Standard configuration
QT450-12 (exterior EP powder)/EPDM rubber ring/bolt Grade 8.8, 6g/nut Grade 8, 6H
Design Features
The internal and external layers of male and female connectors, socket and socket designs, and the use of the gap between the male and female connectors and the engagement of pipes and joints to meet the rigidity requirements, not only inherits the traditional characteristics of the groove type connection method, but also has its own unique advantages.
Due to the improved interface structure, it is not easy to cause lateral and oblique bending of the sealing ring, and the positioning of the sealing ring is more accurate, avoiding abnormal compression and destructive pressure loss of the sealing ring, increasing the sealing performance, and improving the overall service life of the joint.
Hole size
| Nominal diameter mm | Outer diameter of steel pipe mm | Nominal pressure Mpa | Bolt size | Maximum overall dimension mm | ||
| φ | L | H | ||||
| 50 | 60 | 2.5 | 2-M10×55 | 92 | 124 | 47 |
| 65 | 76 | 110 | 140 | |||
| 80 | 89 | 122 | 154 | |||
| 100 | 108 | 2-M10×65 | 148 | 178 | 54 | |
| 100 | 114 | 154 | 186 | |||
| 125 | 133 | 2-M12×70 | 173 | 220 | ||
| 125 | 140 | 180 | 216 | |||
| 150 | 159 | 200 | 238 | |||
| 150 | 165 | 2-M12×75 | 205 | 244 | ||
| 200 | 219 | 266 | 345 | |||
| 250 | 273 | 16 | 3-M16×100 | 330 | 452 | 68 |
| 300 | 325 | 3-M20×110 | 382 | 505 | ||
CONSULT ONLINE
CONTACTUS
ADD.：
Zhaojia Yatou Village North Industrial Park, Yingqiu Town, Changle County, Weifang City, China
WEBSITE：
Copyright © Shandong Tianyuan Pipe Industry Co., Ltd
Mobile Site